GRINNELL光杆蝶阀WC-8100，GHP格林奈尔蝶阀，GRINNELL VALVES中国代理
GRINNELL VALVES 格林奈尔蝶阀 GRINNELL VALVES 格林奈尔蝶阀(现货）
主要包括1000，8000，GHP三大系列
欢迎来到Grinnell阀门公司
Grinnell格林奈尔是工业、商业和建筑市场阀门的领先制造商。
Grinnell格林奈尔阀门采用最先进的加工设备生产。每个阀门在出厂前都经过110%的打压测试，确保每一个阀门的安全可靠。
现货供应GIRNNELL VALVES 美国格林奈尔光杆蝶阀，气动蝶阀，现货口径有：DN80mm,DN100mm,DN150mm等规格。
型号为：
GRINNELL 080 WC-8100/6G/AN150
GRINNELL 100 WC-8100/6G/AN150
GRINNELL 150 WC-8100/6G/AN150
应用：适用于暖通空调，水处理及灌溉市场。
技术资料
尺寸范围：DN50~DN900(2“到36”)
连接方式：对夹，支耳
压力等级：DN50~DN300：250磅
DN350~DN600：200磅
DN750~DN900：150磅
聚四氟乙烯阀座或弹性体覆盖盘：2“到12”–150磅
防护等级：额定的
法兰标准：ASME Class 125 / 150
| | Series 1000 Resilient Seated Butterfly Valves
|  | | BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges. STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability. STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support. SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi. Dead-End Service
The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure. TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure. | |
Series 1000 Resilient Seated Butterfly Valves
|
| | BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges. STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability. STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support. SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi. Dead-End Service
The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure. TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure. |
